NEW LIFE FOR OLDER SYSTEMS
OEC C-arms are reliable and capable workhorses, but many older systems are still equipped with Image Intensifiers. Now, with the MX Express kit and minimal effort, you can upgrade OEC 9800 or 9900 C-arms and maximize the system’s clinical utility.
NEW LIFE FOR OLDER SYSTEMS
OEC C-arms are reliable and capable workhorses, but many older systems are still equipped with Image Intensifiers. Now, with the MX Express kit and minimal effort, you can upgrade OEC 9800 or 9900 C-arms and maximize the system’s clinical utility.
OEC 9800
OEC 9900
Plug & Play Simplicity
The MX Express kit is a simple 3-step plug & play upgrade.
- Remove the old image intensifier
- Electrically connect to the original connectors
- Physically connect to the same attachment points
That’s it! You’ve upgraded and are ready to go.
- NO OPERATIONAL CHANGES
The system operates the same as before the upgrade but with better, more accurate imaging.
- NO OPERATOR TRAINING REQUIRED
The system can be placed into service immediately after the upgrade
Same Operation. Better Imaging.
After an MX Express upgrade, C-arm operation will remain the same, but with a dramatic improvement in image quality. Advanced C-MOS detector technology yields images with low noise and no geometric distortion, so image resolution and contrast increase dramatically at low patient dose. The MX Express image quality improvements facilitate shorter fluoro time plus the ability to zoom with no increase in patient dose.
No Geometric Distortion
65% Increase in Resolution
Fast, Acurate Procedures
Whether used for radiographic or fluoroscopic procedures, the MX Express facilitates faster, more accuate imaging for OEC 9800 and 9900 C-arms
- No warm-up time
- Virtually no image lag
- No need to re-center due to geometric distortion
- Full resolution digital fluoroscopy
- Fluoroscopy frame rates up to 30 fps
